Hi, 7.6.0.3 on HP-UX
Does anybody know if its possible to throw old backupids at an SLP.
Have lots of tape consolidations to do and doing it manually, ensuring I end up with the correct number of images before expiring the original is somewhat tiresome !
Letting the SLP handle them would be much easier.
Many thanks - Darren
Hi all,
I have NBU 7.6.0.4 making backup to storage disk, many clients windows 2008 R2 and 2012 R2, only one client 2012 R2 is very slow, the other clients speed is about 17000 KB/sec, but this one it no pass of 300 KB/sec.
Can anybody help me?
Thanks.
At path=NBU Admin Console->Actions->Configure Client->Client Properties window appeared (after making changes in hosts file for master and client)
But List of client is blank at path=NBU Admin Console->Host Properties->Clients->List of clients is blank.
How we can see entry for Clients at Path=NBU Admin Console->Host Properties->Clients
Thanks for your support!
Hello all,
I have a serious issues with tape drives, I'm a rookie here so please any help would be really appreciated.
Based on whta I already got from previous discussions.
[root@netbackup01 bin]# tpconfig -d
Id DriveName Type Residence
Drive Path Status
****************************************************************************
1 IBM.ULTRIUM-HH5.001 hcart2 TLD(0) DRIVE=3
/dev/nst0 DOWN
2 IBM.ULTRIUM-HH5.002 hcart2 TLD(0) DRIVE=2
/dev/nst1 UP
3 IBM.ULTRIUM-HH5.003 hcart2 TLD(0) DRIVE=6
nrst1a (miafile03) DOWN
4 IBM.ULTRIUM-HH5.004 hcart2 TLD(0) DRIVE=10
nrst0a (miafile03) DOWN
5 IBM.ULTRIUM-HH5.005 hcart2 TLD(0) DRIVE=7
nrst2a (miafile02) DOWN
6 IBM.ULTRIUM-HH5.006 hcart2 TLD(0) DRIVE=8
nrst1a (miafile02) DOWN
7 IBM.ULTRIUM-HH5.007 hcart2 TLD(0) DRIVE=9
nrst0a (miafile02) DOWN
8 IBM.ULTRIUM-HH5.008 hcart2 TLD(0) DRIVE=1
nrst3a (miafile02) DOWN
Currently defined robotics are:
TLD(0) robotic path = /dev/sg3
[root@netbackup01 bin]# cat /proc/scsi/scsi
Attached devices:
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: ULTRIUM-HH5 Rev: E4J1
Type: Sequential-Access ANSI SCSI revision: 06
Host: scsi3 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: ULTRIUM-HH5 Rev: E6Q9
Type: Sequential-Access ANSI SCSI revision: 06
Host: scsi3 Channel: 00 Id: 01 Lun: 00
Vendor: IBM Model: ULTRIUM-HH5 Rev: E6Q9
Type: Sequential-Access ANSI SCSI revision: 06
Host: scsi3 Channel: 00 Id: 01 Lun: 01
Vendor: SPECTRA Model: PYTHON Rev: 2000
Type: Medium Changer ANSI SCSI revision: 03
Host: scsi4 Channel: 00 Id: 00 Lun: 00
Vendor: HL-DT-ST Model: CDRW/DVD GCC4244 Rev: B101
Type: CD-ROM ANSI SCSI revision: 05
Host: scsi8 Channel: 00 Id: 08 Lun: 00
Vendor: DP Model: BACKPLANE Rev: 1.05
Type: Enclosure ANSI SCSI revision: 05
Host: scsi8 Channel: 02 Id: 00 Lun: 00
Vendor: DELL Model: PERC 5/i Rev: 1.03
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi8 Channel: 02 Id: 01 Lun: 00
Vendor: DELL Model: PERC 5/i Rev: 1.03
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi6 Channel: 00 Id: 00 Lun: 00
Vendor: Dell Model: Virtual CDROM Rev: 123
Type: CD-ROM ANSI SCSI revision: 00
Host: scsi7 Channel: 00 Id: 00 Lun: 00
Vendor: Dell Model: Virtual Floppy Rev: 123
Type: Direct-Access ANSI SCSI revision: 00
[root@netbackup01 bin]# /usr/openv/volmgr/bin/scan
************************************************************
*********************** SDT_TAPE ************************
*********************** SDT_CHANGER ************************
************************************************************
------------------------------------------------------------
Device Name : "/dev/sg3"
Passthru Name: "/dev/sg3"
Volume Header: ""
Port: -1; Bus: -1; Target: -1; LUN: -1
Inquiry : "SPECTRA PYTHON 2000"
Vendor ID : "SPECTRA "
Product ID : "PYTHON "
Product Rev: "2000"
Serial Number: "9214002018"
WWN : ""
WWN Id Type : 0
Device Identifier: "SPECTRA PYTHON 9214002018"
Device Type : SDT_CHANGER
NetBackup Robot Type: 8
Removable : Yes
Device Supports: SCSI-3
Number of Drives : 10
Number of Slots : 120
Number of Media Access Ports: 1
Drive 1 Serial Number : "1012002018"
Drive 2 Serial Number : "1013002018"
Drive 3 Serial Number : "1014002018"
Drive 4 Serial Number : "1015002018"
Drive 5 Serial Number : "1016002018"
Drive 6 Serial Number : "1017002018"
Drive 7 Serial Number : "1018002018"
Drive 8 Serial Number : "1019002018"
Drive 9 Serial Number : "101A002018"
Drive 10 Serial Number : "101B002018"
Flags : 0x0
Reason: 0x0
------------------------------------------------------------
Device Name : "/dev/nst2"
Passthru Name: "/dev/sg2"
Volume Header: ""
Port: -1; Bus: -1; Target: -1; LUN: -1
Inquiry : "IBM ULTRIUM-HH5 E6Q9"
Vendor ID : "IBM "
Product ID : "ULTRIUM-HH5 "
Product Rev: "E6Q9"
Serial Number: "1015002018"
WWN : ""
WWN Id Type : 0
Device Identifier: "IBM ULTRIUM-HH5 1015002018"
Device Type : SDT_TAPE
NetBackup Drive Type: 10
Removable : Yes
Device Supports: SCSI-6
Flags : 0x0
Reason: 0x0
------------------------------------------------------------
Device Name : "/dev/nst1"
Passthru Name: "/dev/sg1"
Volume Header: ""
Port: -1; Bus: -1; Target: -1; LUN: -1
Inquiry : "IBM ULTRIUM-HH5 E6Q9"
Vendor ID : "IBM "
Product ID : "ULTRIUM-HH5 "
Product Rev: "E6Q9"
Serial Number: "1013002018"
WWN : ""
WWN Id Type : 0
Device Identifier: "IBM ULTRIUM-HH5 1013002018"
Device Type : SDT_TAPE
NetBackup Drive Type: 10
Removable : Yes
Device Supports: SCSI-6
Flags : 0x0
Reason: 0x0
------------------------------------------------------------
Device Name : "/dev/nst0"
Passthru Name: "/dev/sg0"
Volume Header: ""
Port: -1; Bus: -1; Target: -1; LUN: -1
Inquiry : "IBM ULTRIUM-HH5 E4J1"
Vendor ID : "IBM "
Product ID : "ULTRIUM-HH5 "
Product Rev: "E4J1"
Serial Number: "1014002018"
WWN : ""
WWN Id Type : 0
Device Identifier: "IBM ULTRIUM-HH5 1014002018"
Device Type : SDT_TAPE
NetBackup Drive Type: 10
Removable : Yes
Device Supports: SCSI-6
Flags : 0x0
Reason: 0x0
[root@netbackup01 bin]#
e.g.
[root@netbackup01 bin]# /usr/openv/volmgr/bin/scsi_command -d /dev/nst0
Inquiry data: removable dev type 1h IBM ULTRIUM-HH5 E4J1
[root@netbackup01 bin]# /usr/openv/volmgr/bin/scsi_command -d /dev/nst0
nst0 nst0a nst0l nst0m
[root@netbackup01 bin]# /usr/openv/volmgr/bin/scsi_command -d /dev/nst0a
Inquiry data: removable dev type 1h IBM ULTRIUM-HH5 E4J1
Hello again guys,
Master W2K8 7.5.0.7
Media Linux SuSe 11 SP2 7.5.0.7
FEWS and BESQL Windows 2008 Standard R2
I have got everything working hunky dory till last week and now sharepoint incremental backups are finishing partially.
Full, GRT and VMware Sharepoint backups all working fine. It's just the incrementals that reports status 1. I have checked bpbkar logs, bpresolvers logs on both FEWS and Backend SQL but couldn't find anything.. "getting old maybe"
16/03/2015 11:34:57 - Warning bpbrm(pid=6103) from client mtsp02.ix.com: WRN - can't open object: Microsoft SharePoint Resources:\Services\State Service\Services-DB 1 (MTDB01/SQLDB/StateService_e2221bd916184a3e8817f10a9480c6c2)\StateService_e2221bd916184a3e8817f10a9480c6c2 (BEDS 0xE000FEA9: The Backup Exec data store encountered a problem during the operation. See the job log for details.)
any ideas?
Hello,
What is the best way to setup a backup with multiple retention levels? For example, for a number of backups, we are looking at configuring the following configuration:
Monthly full backups of the data. In a given 3 month period, 2 of the backups should be kept for 2 years and the last one kept for longer than that.
There is also talk of making the longer retention backup occur in specific months (not finalized yet).
Currently we do have some frequency based backup that do this on a weekly level and seem to not be running 2 backups in the same windows, but I am not sure how this will translate when the windows are a month long.
We are currently running Netbackup 7.6
Alexander Harris
Hello friends,
we are planning to upgrade NBU Master server 7.1 to NBU Master server 7.5 on windows server .
what are the prerequisites we need to follow , please provide the detailes step by step ..
thanks in advance .
Having a weird error every now and again over here, when ever I try to export tapes from my library (Spectralogic T120) I get the error,"Media Access port already contains media"
What's weird is that I'm able to update the inventory on the library and it displays correctly.
I ran a /scan and I see 9 MAP slots (WHICH IS WEIRD BECAUSE IT SHOULD ONLY HAVE 8)
Device Identifier: "SPECTRA PYTHON 91180056CF"
Device Type : SDT_CHANGER
NetBackup Robot Type: 8
Removable : Yes
Device Supports: SCSI-3
Number of Drives : 4
Number of Slots : 95
Number of Media Access Ports: 9
Any ideas how I'd go about troubleshooting this ?
Hello People,
I need a little help.
For I create VxMS log I need create the VXMS folder and the register on regedit, ok?!
But I need create this two things in Media server of VMWARE or direct in client that have a failure?
Very thanks.
Please share your experience with overall Dedup, Replication, AIR. We are trying to collecting some information about these Dedup OST Backup appliances for a project and your information will help us.
Thank you,
Hi All
I recently installed NBU 7.6.1. My backups are running except for a few clients that cannot connect. However when I try to restore the all clients cannot connect to the master server.
I tried to put the SQL Credentials manually and that does not work.
Regards
Hello everyone,
my Oracle DB Backup is failing with the Statuscode 6. It's an oracle intelligent policy.
Oracle 11.2.0.4
SunOS 5.10
The detailed status is the following:
==================================================================
2/26/2015 11:09:41 AM - Info nbjm(pid=4484) requesting MEDIA_SERVER_ONLY resources from RB for backup job (jobid=12581, request id:{6E0EFB65-5EC8-4FB3-82F1-95F5C8B7C70E})
2/26/2015 11:09:41 AM - requesting resource DDSU_CB-MAN-006
2/26/2015 11:09:41 AM - requesting resource cb-man-201.server.wie.DOMAIN.local.NBU_POLICY.MAXJOBS.POLICY
2/26/2015 11:09:41 AM - granted resource cb-man-201.server.wie.DOMAIN.local.NBU_POLICY.MAXJOBS.POLICY
2/26/2015 11:09:41 AM - estimated 0 Kbytes needed
2/26/2015 11:09:41 AM - Info nbjm(pid=4484) started backup (backupid=CLIENT_1424945381) job for client CLIENT, policy POLICY, schedule WEEKLY_FULL on storage unit
2/26/2015 11:09:42 AM - started process bpbrm (37444)
2/26/2015 11:09:44 AM - Info bpbrm(pid=37444) CLIENT is the host to backup data from
2/26/2015 11:09:44 AM - Info bpbrm(pid=37444) reading file list for client
2/26/2015 11:09:44 AM - connecting
2/26/2015 11:09:46 AM - Info bpbrm(pid=37444) starting bphdb on client
2/26/2015 11:09:46 AM - connected; connect time: 0:00:02
2/26/2015 11:09:47 AM - Info bphdb(pid=17676) Backup started
2/26/2015 11:09:47 AM - Info bphdb(pid=17676) Waiting for the child status
2/26/2015 11:09:49 AM - Info bphdb(pid=17676) INF - ************************************************************
2/26/2015 11:09:49 AM - Info bphdb(pid=17676) INF - Backup Information:
2/26/2015 11:09:49 AM - Info bphdb(pid=17676) INF - Client: CLIENT
2/26/2015 11:09:49 AM - Info bphdb(pid=17676) INF - ORACLE_SID: CX1
2/26/2015 11:09:49 AM - Info bphdb(pid=17676) INF - ORACLE_HOME: /oracle/CX1/11204
2/26/2015 11:09:49 AM - Info bphdb(pid=17676) INF - Offline (Cold) Stream backup requested
2/26/2015 11:09:49 AM - Info bphdb(pid=17676) INF - Objects being backed up:
2/26/2015 11:09:49 AM - Info bphdb(pid=17676) INF - Whole Database
2/26/2015 11:09:49 AM - Info bphdb(pid=17676) INF - Archive Logs
2/26/2015 11:09:49 AM - Info bphdb(pid=17676) INF - Control File
2/26/2015 11:09:49 AM - Info bphdb(pid=17676) INF - Number of channels to allocate (database): 1
2/26/2015 11:09:49 AM - Info bphdb(pid=17676) INF - Number of channels to allocate (archive logs): 1
2/26/2015 11:09:49 AM - Info bphdb(pid=17676) INF - Oracle Authentication is being used
2/26/2015 11:09:49 AM - Info bphdb(pid=17676) INF - RMAN Default Limits will be used (Database)
2/26/2015 11:09:49 AM - Info bphdb(pid=17676) INF - RMAN Default Limits will be used (Archive Logs)
2/26/2015 11:09:49 AM - Info bphdb(pid=17676) INF - Backup File Name Formats:
2/26/2015 11:09:49 AM - Info bphdb(pid=17676) INF - Database: bk_d%d_u%u_s%s_p%p_t%t
2/26/2015 11:09:49 AM - Info bphdb(pid=17676) INF - Archive Log: arch_d%d_u%u_s%s_p%p_t%t
2/26/2015 11:09:49 AM - Info bphdb(pid=17676) INF - Control File: ctrl_d%d_u%u_s%s_p%p_t%t
2/26/2015 11:09:49 AM - Info bphdb(pid=17676) INF - End of Backup Information
2/26/2015 11:09:49 AM - Info bphdb(pid=17676) INF - ************************************************************
2/26/2015 11:09:50 AM - Error bpbrm(pid=37444) from client CLIENT: ERR - Script exited with status = 1 <the requested operation was partially successful>
2/26/2015 11:09:50 AM - Error bpbrm(pid=37444) from client CLIENT: ERR - bphdb exit status = 6: the backup failed to back up the requested files
2/26/2015 11:09:51 AM - Error bpbrm(pid=37444) cannot send mail to Backup@DOMAIN.com
2/26/2015 11:09:52 AM - Info bphdb(pid=17676) done. status: 6: the backup failed to back up the requested files
2/26/2015 11:09:52 AM - end writing
the backup failed to back up the requested files(6)
========================================================================================
Here an output from the latest bpdbsbora:
13:00:13.467 [19223] <2> main bpdbsbora: *****************************.
13:00:13.472 [19223] <2> conf_update_time: ../../libvlibs/nbconf_glue.cpp.429: errno: 2 2 0x00000002
13:00:13.472 [19223] <2> conf_update_time: ../../libvlibs/nbconf_glue.cpp.430: path: /oracle/CX1/bp.conf
13:00:13.473 [19223] <8> main bpdbsbora: Could not get locale, using the C locale
13:00:13.476 [19223] <8> load_name_value: unknown name/value pair <OS_check_password=>
13:00:13.476 [19223] <2> main bpdbsbora: Using Master server name from config: cr-man-201.server.wie.commerzreal.local
13:00:13.482 [19223] <2> vnet_pbxConnect: pbxConnectEx Succeeded
13:00:13.483 [19223] <2> logconnections: BPRD CONNECT FROM 10.1.8.167.43320 TO 10.3.20.63.1556 fd = 5
13:00:13.514 [19223] <2> send_backup_info_to_job_details: Begin progress logging to file BRMJBD6
13:00:13.514 [19223] <2> send_backup_info_to_job_details: **LOCALE ERROR** locale <en_US.ISO8859-15> not found in file </usr/openv/msg/.conf>
13:00:13.520 [19223] <2> ReadULDebugLevel: ReadCfg failed with 6
13:00:13.520 [19223] <2> ReadULDebugLevel: ReadCfg failed with 6
13:00:13.520 [19223] <2> ReadULDebugLevel: ReadCfg failed with 6
13:00:13.529 [19223] <4> ncfLogArgs: VxUL id = 11
13:00:13.530 [19223] <4> RuntimeLoader::loadInterface: VxUL id = 4
13:00:13.530 [19223] <4> engineMainL1: VxUL id = 4
13:00:13.530 [19223] <4> engineMainL1: VxUL id = 33
13:00:13.530 [19223] <4> engineMainL1: VxUL id = 34
13:00:13.531 [19223] <4> RuntimeLoader::loadInterface: VxUL id = 4
13:00:13.532 [19223] <4> RuntimeLoader::loadInterface: VxUL id = 4
13:00:13.532 [19223] <4> RuntimeLoader::loadInterface: VxUL id = 4
13:00:13.823 [19223] <4> RuntimeLoader::loadInterface: VxUL id = 4
13:00:13.825 [19223] <4> RuntimeLoader::loadInterface: VxUL id = 4
13:00:13.826 [19223] <4> RuntimeLoader::loadInterface: VxUL id = 4
13:00:13.827 [19223] <4> RuntimeLoader::loadInterface: VxUL id = 4
13:00:13.834 [19223] <4> RuntimeLoader::loadInterface: VxUL id = 4
13:00:13.835 [19223] <4> RuntimeLoader::loadInterface: VxUL id = 4
13:00:13.839 [19223] <4> RuntimeLoader::loadInterface: VxUL id = 4
13:00:13.842 [19223] <4> RuntimeLoader::loadInterface: VxUL id = 4
13:00:13.843 [19223] <4> RuntimeLoader::loadInterface: VxUL id = 4
13:00:13.844 [19223] <4> RuntimeLoader::loadInterface: VxUL id = 4
13:00:14.092 [19223] <4> RuntimeLoader::loadInterface: VxUL id = 4
13:00:13.845 [19223] <4> RuntimeLoader::loadInterface: VxUL id = 4
13:00:14.097 [19223] <4> RuntimeLoader::loadInterface: VxUL id = 4
13:00:14.099 [19223] <16> PluginDirector::getPlugin: VxUL id = 29
13:00:15.118 [19223] <16> CFECallback::reportStatus: VxUL id = 5
13:00:15.136 [19223] <16> check_database_state: NBBrowseEngine call failed. Status: 114
13:00:15.136 [19223] <16> main bpdbsbora: Error while checking the database state
13:00:15.142 [19223] <4> main bpdbsbora: Exited with status <1>
In my opinion the last three lines are interesting - do you know what the "NBBrowsEngine call failed" means?
Thanks in advance!
Best regards
So this is kind of a very broad question that I was hoping to just get a discussion going about. I am new to doing capacity planning, but in my new role I have to do literally everything for the environment. In my previous work locations we had a team that did all the capacity planning for drive distribution, how many tape drives were needed, tapes, disk storage size and all that good stuff. Now that this falls on me I am hoping to get some help as far as capacity planning is concerned. For starters I would like to be able to provide management accurate data on how much disk storage we need in order to put our entire environment on disk. I have OpsCenter up and running as well as an application called Splunk which can tap into any log or command output that Netbackup has or can run. At this time it seems as though all they really do here is go off of the nbdeployutil and use the charged capacity total number. I am looking for ideas/input on what I can really do to track capacity as well as growth.
Hello,
We are having an issue with connecting our backup server connected to our domain and a workgroup computer in our DMZ. We have attempted to update the host files, inputted the server directly in the registry, checked the firewall settings, and checked communication between server and clients.
Note:
Master server (10.1.12.64) is connected to our domain, and the client server (10.1.100.25) is on a workgroup.
I'm baffled why our firewall IP is trying to be used as the master/media server? Below is the log file from the client server.
12:25:22.518 [4856.1208] <2> setup_debug_log: switched debug log file for bpcd
12:25:22.518 [4856.1208] <4> bpcd main: VERBOSE=0, BPCD VERBOSE=0 Timestamp=1426181836
12:25:22.518 [4856.1208] <2> logparams: C:\Program Files\Veritas\NetBackup\bin\bpcd.exe -standalone
12:25:22.518 [4856.1208] <2> process_requests: offset to GMT 25200
12:25:22.534 [4856.1208] <2> logconnections: BPCD ACCEPT FROM 10.1.100.1.21585 TO 10.1.100.25.1556 fd = 460
12:25:22.534 [4856.1208] <2> process_requests: setup_sockopts complete
12:25:27.074 [4856.1208] <8> retry_getnameinfo: [vnet_addrinfo.c:1143] getnameinfo() failed 11004 0x2afc
12:25:27.074 [4856.1208] <8> vnet_cached_getnameinfo: [vnet_addrinfo.c:1914] retry_getnameinfo() failed RV=11004 IPSTR=10.1.100.1 PORT=21585
12:25:27.074 [4856.1208] <2> bpcd peer_hostname: vnet_cached_getnameinfo() failed: 6 11004
12:25:27.074 [4856.1208] <2> bpcd peer_hostname: Connection from host 10.1.100.1 (10.1.100.1) port 21585
12:25:27.074 [4856.1208] <2> bpcd valid_server: comparing backupserver.domain.com and 10.1.100.1
12:25:27.074 [4856.1208] <2> bpcd valid_server: comparing 10.1.12.64 and 10.1.100.1
12:25:27.074 [4856.1208] <4> bpcd valid_server: 10.1.100.1 is not a master server
12:25:27.074 [4856.1208] <16> bpcd valid_server: 10.1.100.1 is not a media server either
12:25:27.074 [4856.1208] <2> process_requests: output socket port number = 1
12:25:27.167 [4856.1208] <2> process_requests: Duplicated vnetd socket on stderr
12:25:27.167 [4856.1208] <2> process_requests: <---- NetBackup 7.6.1 0 ------------initiated
12:25:27.167 [4856.1208] <2> process_requests: VERBOSE = 0
12:25:27.167 [4856.1208] <2> bpcd exit_bpcd: exit status 46 ----------->exiting
12:25:27.167 [4856.1208] <4> bpcd exit_bpcd: FTL - BPCD EXIT STATUS 46
12:25:27.167 [4856.1208] <16> process_requests: Server access denied
12:25:27.261 [5912.6056] <2> setup_debug_log: switched debug log file for bpcd
12:25:27.261 [5912.6056] <4> bpcd main: VERBOSE=0, BPCD VERBOSE=0 Timestamp=1426181836
12:25:27.261 [5912.6056] <2> logparams: C:\Program Files\Veritas\NetBackup\bin\bpcd.exe -standalone
12:25:27.261 [5912.6056] <2> process_requests: offset to GMT 25200
12:25:27.261 [5912.6056] <2> logconnections: BPCD ACCEPT FROM 10.1.100.1.43848 TO 10.1.100.25.1556 fd = 460
12:25:27.261 [5912.6056] <2> process_requests: setup_sockopts complete
12:25:31.816 [5912.6056] <8> retry_getnameinfo: [vnet_addrinfo.c:1143] getnameinfo() failed 11004 0x2afc
12:25:31.816 [5912.6056] <8> vnet_cached_getnameinfo: [vnet_addrinfo.c:1914] retry_getnameinfo() failed RV=11004 IPSTR=10.1.100.1 PORT=43848
12:25:31.816 [5912.6056] <2> bpcd peer_hostname: vnet_cached_getnameinfo() failed: 6 11004
12:25:31.816 [5912.6056] <2> bpcd peer_hostname: Connection from host 10.1.100.1 (10.1.100.1) port 43848
12:25:31.816 [5912.6056] <2> bpcd valid_server: comparing clientserver.domain.com and 10.1.100.1
12:25:31.816 [5912.6056] <2> bpcd valid_server: comparing 10.1.12.64 and 10.1.100.1
12:25:31.816 [5912.6056] <4> bpcd valid_server: 10.1.100.1 is not a master server
12:25:31.816 [5912.6056] <16> bpcd valid_server: 10.1.100.1 is not a media server either
12:25:31.816 [5912.6056] <2> process_requests: output socket port number = 1
12:25:31.910 [5912.6056] <2> process_requests: Duplicated vnetd socket on stderr
12:25:31.910 [5912.6056] <2> process_requests: <---- NetBackup 7.6.1 0 ------------initiated
12:25:31.910 [5912.6056] <2> process_requests: VERBOSE = 0
12:25:31.910 [5912.6056] <2> bpcd exit_bpcd: exit status 46 ----------->exiting
12:25:31.925 [5912.6056] <4> bpcd exit_bpcd: FTL - BPCD EXIT STATUS 46 <?xml version="1.0" encoding="utf-8"?><StatusMsgDoc><StatusMsg NBUStatus="46" Severity="2" VXULoid="137" VXULtid="114"><P pos="0">10.1.100.1</P><P pos="1">10.1.100.1</P><P pos="2">clientserver.domain.com</P><P pos="3">10.1.100.25</P><MsgString>Request from host 10.1.100.1 (10.1.100.1) to host clientserver.domain.com (10.1.100.25) is not allowed access.</MsgString><StatusMsg NBUStatus="46" Severity="0" VXULoid="137" VXULtid="115"><P pos="0">10.1.100.1</P><P pos="1">10.1.100.1</P><P pos="2">clientserver</P><MsgString>Host 10.1.100.1 (10.1.100.1) is not an authorized server for host clientserver.</MsgString></StatusMsg></StatusMsg></StatusMsgDoc>
12:25:31.925 [5912.6056] <16> process_requests: Server access denied
12:25:32.003 [4424.3652] <2> setup_debug_log: switched debug log file for bpcd
12:25:32.003 [4424.3652] <4> bpcd main: VERBOSE=0, BPCD VERBOSE=0 Timestamp=1426181836
12:25:32.003 [4424.3652] <2> logparams: C:\Program Files\Veritas\NetBackup\bin\bpcd.exe -standalone
12:25:32.003 [4424.3652] <2> process_requests: offset to GMT 25200
12:25:32.019 [4424.3652] <2> logconnections: BPCD ACCEPT FROM 10.1.100.1.15098 TO 10.1.100.25.1556 fd = 460
12:25:32.019 [4424.3652] <2> process_requests: setup_sockopts complete
12:25:36.558 [4424.3652] <8> retry_getnameinfo: [vnet_addrinfo.c:1143] getnameinfo() failed 11004 0x2afc
12:25:36.558 [4424.3652] <8> vnet_cached_getnameinfo: [vnet_addrinfo.c:1914] retry_getnameinfo() failed RV=11004 IPSTR=10.1.100.1 PORT=15098
12:25:36.558 [4424.3652] <2> bpcd peer_hostname: vnet_cached_getnameinfo() failed: 6 11004
12:25:36.558 [4424.3652] <2> bpcd peer_hostname: Connection from host 10.1.100.1 (10.1.100.1) port 15098
12:25:36.558 [4424.3652] <2> bpcd valid_server: comparing backupserver.domain.com and 10.1.100.1
12:25:36.558 [4424.3652] <2> bpcd valid_server: comparing 10.1.12.64 and 10.1.100.1
12:25:36.558 [4424.3652] <4> bpcd valid_server: 10.1.100.1 is not a master server
12:25:36.558 [4424.3652] <16> bpcd valid_server: 10.1.100.1 is not a media server either
12:25:36.558 [4424.3652] <2> process_requests: output socket port number = 1
12:25:36.636 [4424.3652] <2> process_requests: Duplicated vnetd socket on stderr
12:25:36.636 [4424.3652] <2> process_requests: <---- NetBackup 7.6.1 0 ------------initiated
12:25:36.636 [4424.3652] <2> process_requests: VERBOSE = 0
12:25:36.636 [4424.3652] <2> bpcd exit_bpcd: exit status 46 ----------->exiting
12:25:36.636 [4424.3652] <4> bpcd exit_bpcd: FTL - BPCD EXIT STATUS 46
12:25:36.636 [4424.3652] <16> process_requests: Server access denied
12:25:36.730 [4980.4044] <2> setup_debug_log: switched debug log file for bpcd
12:25:36.730 [4980.4044] <4> bpcd main: VERBOSE=0, BPCD VERBOSE=0 Timestamp=1426181836
12:25:36.730 [4980.4044] <2> logparams: C:\Program Files\Veritas\NetBackup\bin\bpcd.exe -standalone
12:25:36.730 [4980.4044] <2> process_requests: offset to GMT 25200
12:25:36.730 [4980.4044] <2> logconnections: BPCD ACCEPT FROM 10.1.100.1.32373 TO 10.1.100.25.1556 fd = 460
12:25:36.730 [4980.4044] <2> process_requests: setup_sockopts complete
12:25:41.285 [4980.4044] <8> retry_getnameinfo: [vnet_addrinfo.c:1143] getnameinfo() failed 11004 0x2afc
12:25:41.285 [4980.4044] <8> vnet_cached_getnameinfo: [vnet_addrinfo.c:1914] retry_getnameinfo() failed RV=11004 IPSTR=10.1.100.1 PORT=32373
12:25:41.285 [4980.4044] <2> bpcd peer_hostname: vnet_cached_getnameinfo() failed: 6 11004
12:25:41.285 [4980.4044] <2> bpcd peer_hostname: Connection from host 10.1.100.1 (10.1.100.1) port 32373
12:25:41.285 [4980.4044] <2> bpcd valid_server: comparing backupserver.domain.com and 10.1.100.1
12:25:41.285 [4980.4044] <2> bpcd valid_server: comparing 10.1.12.64 and 10.1.100.1
12:25:41.285 [4980.4044] <4> bpcd valid_server: 10.1.100.1 is not a master server
12:25:41.285 [4980.4044] <16> bpcd valid_server: 10.1.100.1 is not a media server either
12:25:41.285 [4980.4044] <2> process_requests: output socket port number = 1
12:25:41.363 [4980.4044] <2> process_requests: Duplicated vnetd socket on stderr
12:25:41.363 [4980.4044] <2> process_requests: <---- NetBackup 7.6.1 0 ------------initiated
12:25:41.363 [4980.4044] <2> process_requests: VERBOSE = 0
12:25:41.363 [4980.4044] <2> bpcd exit_bpcd: exit status 46 ----------->exiting
12:25:41.379 [4980.4044] <4> bpcd exit_bpcd: FTL - BPCD EXIT STATUS 46 <?xml version="1.0" encoding="utf-8"?><StatusMsgDoc><StatusMsg NBUStatus="46" Severity="2" VXULoid="137" VXULtid="114"><P pos="0">10.1.100.1</P><P pos="1">10.1.100.1</P><P pos="2">clientserver.domain.com</P><P pos="3">10.1.100.25</P><MsgString>Request from host 10.1.100.1 (10.1.100.1) to host clientserver.domain.com (10.1.100.25) is not allowed access.</MsgString><StatusMsg NBUStatus="46" Severity="0" VXULoid="137" VXULtid="115"><P pos="0">10.1.100.1</P><P pos="1">10.1.100.1</P><P pos="2">clientserver</P><MsgString>Host 10.1.100.1 (10.1.100.1) is not an authorized server for host clientserver.</MsgString></StatusMsg></StatusMsg></StatusMsgDoc>
12:25:41.379 [4980.4044] <16> process_requests: Server access denied
Thank you for your help.
hi team,
can you please help me to provide the maximum storage allocation in single MSDP option. I checked the dedupe guide , and found its 64 TB .
just need expert comments here if its possible to allocate more than 64 TB one single media server.
Also, Can I create more than one MSDP disk pool on the same media server. ( Like D drive - 64 TB , E drive - 64 TB )
media server is windows 2012.
netbackup - 7.6.0.3
Hi, i have this common problem but don´t encountered solution. Please, help.
This is a VMWare virtual machine, and the space disk is Ok.
06/03/2015 04:17:30 a.m. - Critical bpbrm(pid=13220) from client servgdmon3.servcorp.com.ar: cannot open C:\Program Files\Veritas\NetBackup\online_util\fi_cntl\bpfis.fim.servgdmon3.servcorp.com.ar_1425626061.1.0
06/03/2015 04:17:30 a.m. - Info bpfis(pid=6904) done. status: 1542
06/03/2015 04:17:30 a.m. - end VMware, Delete Snapshot; elapsed time: 00:00:09
06/03/2015 04:17:30 a.m. - Info bpfis(pid=0) done. status: 1542: An existing snapshot is no longer valid and cannot be mounted for subsequent operations
06/03/2015 04:17:30 a.m. - end writing
Status 1542
06/03/2015 04:17:30 a.m. - end operation
Status 156
06/03/2015 04:17:30 a.m. - end operation
snapshot error encountered(156)
This issue still exists in 7.6.0.4. In fact we never started having the problem until our Backup Team applied Maintenance Release 7.6.0.4. Now the problem is cropping up.
https://www-secure.symantec.com/connect/forums/vmware-snapshots-being-locked-netbackup-7602-upgrade
Hi,
I have 3 Red Hat linux 6.6 all having Sybase sap 15.7.
Do I need 3 agent for sap along with 3 standard client with server license?
Or 3 application And database license along with standard client?
Our storage is windows 2012 storage server HP.
Backup is not over San
Thanks
Hi,
Recently we have configured two new Media Server on AIX for SAN based backup, our Master server is on Windows.
Zoning bewteen TL & AIX Server is done, able to view the drives (rmt) in AIX using lsdev -Cc tape command.
While configuring TL from Master server its not detecting for one for the AIX Server.
Host entries has added.
NBU Version 7.5
Important Note:- Both AIX Server is in Cluster.
Regards,
Mitesh
Hi
In the properties of my MSDP storage server - I can see the Catalog Logical size, Catalog Files count & Deduplication ratio mentioned in the Storage server properties.
Can you please explain what are these parameters, especially am not sure about the catalog logical size, because the size mentioned is very large than the total size of the Disk pool.????